 |
| JIS-P
Series (Cross-Section Diameter ∮1.9, ∮2.4, ∮3.5, ∮5.7, ∮8.4,
for Dynamic Seal) |
| JIS-G
Series (Cross-Section Diameter ∮3.1, ∮5.7, for Static Seal) |
| JIS-S
Series (for Static Seal) |
| JIS-SS
Series (for Static Seal) |
| JIS-V
Series (for Vacuum Flange) |
| JASO
Cross-Section Diameter ∮1.9 Series (for Static and Dynamic
Seal) |
| JASO
Cross-Section Diameter ∮2.4 Series (Old JASO2000 Series, for
Static and Dynamic Seal) |
| JASO
Cross-Section Diameter ∮3.1 Series (for Static and Dynamic
Seal) |
| JASO
Cross-Section Diameter ∮3.5 Series (Old JASO 3000 Series,
for Static and Dynamic Seal) |
| ISO
Industry General-Purpose Series (for Static Seal) |
| JIS-WE
Series (EPDM Material for Water Sealing, for Static and Dynamic
Seal) |
| JIS
IRON RUBBER P, G Series (for Static and Dynamic Seal) |
| JIS
Check Ring |
| JIS
Special O-Ring |
| American
Standard AS-658 Series (for Static and Dynamic Seal) |
| The
Table of O-Ring Materials |
|
 |
 |
| Piston
Seal
|
| Rod
Seal
|
| Piston
and Rod Seal
|
|
 |
| Reciprocating
Motion Dust Seal
|
| Reciprocating
Motion Support Ring
|
| Reciprocating
Motion Wearing Ring
|
|
 |
Mechanical
 |
The
Mechanical Seal for Pump
|
The
Mechanical Seal for Cauldron
|
| |
| Type
E011 Single End Face, Multiple
Springs, and Balanced Structure
Mechanical Seal for Cauldron |
| Type
E012 Fitted Outside, Single End
Face, Single Spring, and Balanced
Structure Mechanical Seal for
Cauldron |
| Type
E013 Double End Faces, Multiple
Springs, and Unbalanced Structure
Mechanical Seal for Cauldron |
| Type
E014 Double End Faces, Multiple
Springs, and Balanced Structure
Mechanical Seal for Cauldron |
| Type
E015 Double End Faces, Multiple
Springs, and Balanced Structure
Mechanical Seal for Cauldron |
| Type
E016 Double End Faces, Multiple
Springs, Fitted Outside, Static,
Containerized Structure Mechanical
Seal for Cauldron |
| Type
E017 Single End Face, Small Spring,
and Balanced Structure Mechanical
Seal for Cauldron |
| Type
E018 Fitted Inside, Single End
Face, Single Spring, Drive Sleeve
Transmission and Unbalanced Structure
Mechanical Seal for Cauldron |
| Type
E019 Single End Face, Balanced,
Arbitrary Direction of rotation,
Multiple Springs, Cartridge Structure
Mechanical Seal for Cauldron |
| Type
E020 Single End Face, Unbalanced,
Arbitrary Direction of rotation,
Multiple Springs, Cartridge Structure
Mechanical Seal for Cauldron |
| Type
E021 Whole Double End Faces, Multiple
Springs, Cartridge Structure Mechanical
Seal for Cauldron |
| Type
E022 Dry Gas Seal for Cauldron
(Puddler) |
| Type
E023 Cartridge Mechanical Seal
for Cauldron (Only Suitable for
the Top Drive Puddler) |
|
|
| The
Mechanical Seal for Compressor
|
| The
Mechanical Seal for Other Main Engines (Air
Blower, Submersible Machine, Freezing Machine
and so on.)
|
| Seal
Auxiliary System for Mechanical Seal
|
| **Material
Tables for Mechanical Seal End Face** |
| **
Seal Auxiliary Material Tables for Mechanical
Seal** |
|
|
Packing
|
Graphite
Packing
|
|
Aramid
Packing
|
| Carbon
Fibre Packing
|
| PTFE
Packing
|
| Other
Packings
|
|
|
| Gasket
Seal
| | |
